KNOW THE PRODUCT
The buoy filling factory of MAINPOL is designed for the production of EPS for filling marine buoys, using a specific machine designed for the injection and expansion of the material inside the buoys.
JOIN SUSTAINABLE MANUFACTURING
The EPS manufacturing process does not emit polluting gases into the atmosphere
FABRICATION PROCESS
Buoy filling machine
This machine is in charge of injecting and expanding the EPS balls in the buoy.
Boiler
The steam boiler produces the water vapor necessary for the different phases of the expansion process (expansion of the raw material beads, welding and pressing of the block) It is fully automatic and requires minimal maintenance.
Silos
The silos are used for the storage and rest of the expanded beads, while their stabilization occurs. The dimensions of the silos are very varied and adaptable to customer needs.
Compressor
The compressor produces the air necessary for the movement of valves, flaps, etc. The tank is a storage of the air produced by the compressor.
TECHNICAL DATA
- Necessary covered area: 100 m2.
- Production: 30 m3/h
- Necessary personnel: 1 operator.
- Production densities: 15-25 g / l first expansion and 9-15 g / l second expansion.
- Steam consumption: 200 kg/h.
- Fuel consumption: 14 l/h.
- Electricity consumption: 7 KWh.
*Approximate data, may vary depending on density, etc.
